Skip to content
EN
Request a quote

Catalogue

Tractor electrical parts

All our part numbers in this family. If your part doesn't appear, our engineering office can design it.

By family
By machine

11 parts shown

The online catalogue shows a selection of our part numbers. Our production capacity goes far beyond it.

The guide

Choosing the right tractor electrical parts

One bad contact is enough to keep a tractor in the shed. Our tractor electrical parts replace the most heavily used controls: Sonalika ignition switches, Deutz and Sonalika combination switches, Massey Ferguson switches, Deutz pull controls. They fit in place of the original, and they don’t give up at the first storm.

+200 part numbers available
on request

  1. Vibration, dust, humidity, temperature swings: a tractor’s electrical controls live in harsh conditions. That is why every part number starts from the manufacturer’s original part, redrawn by our engineering office in France, then produced in our own moulds. It is then approved in the laboratory before production starts, to European and international standards.

    • Erratic starting, a dashboard that goes dark while driving: the ignition switch is the cause.
    • Indicators or lights that no longer respond, a lever that sticks: the combination switch is worn.
    • A switch that heats up, or only works intermittently.
    • A pull control that is stiff or no longer returns.

  3. A faulty electrical control is more than a nuisance: lights that no longer come on on the road, or a contact that heats up, are a real risk. At the slightest doubt, it is better to replace the part before the season than in the middle of a working day. Before ordering, note the number on the part or its connector and send us a photo: we confirm the match before shipping.

  4. We work directly, from design to shipping. The price gap with the big brands comes from margins, not from quality. You get the tractor back in working order at a controlled cost, with a part that will last the next season.

    For wiring, the electrical diagrams of manufacturers such as Massey Ferguson or Sonalika remain the reference.

Quality control

The 5 criteria of a quality part

A good part can be recognised before fitting. Here is what we check, and what you can check yourself.

5/5 Criteria checked
on every part number

  1. Traceable materials

    Each batch is linked to its steel grade, matching the original part.

    Checked

  2. Our own moulds

    It is made on our own tooling, not copied by eye from a worn part.

    Checked

  3. Approved in the laboratory

    Dimensions and strength are then checked before production starts.

    Checked

  4. European and international standards

    Compliance is documented, part number by part number.

    Checked

  5. Stated warranty

    Finally, duration and terms are written down before the order, not after the breakdown.

    Checked

On request

Your part number isn't in the catalogue? We design it.

The online catalogue only shows part of what we can do. Send us the number engraved on the old part, or a photo of it. Our engineering office analyses it, then we reply with the matching part and the price.

Request a quote

+33 7 70 43 36 61 contact@valmyfrance.com